Commerical Grade Waterproofer is an advanced silconized, acrylic blend designed to stop water from penetrating into bare, porous concrete surfaces such as split-face or fluted concrete block.
It provides a tough, breathable, non-yellowing film that reduces freeze damage and strengthens mortar joints. If added to paint, it improves spread rate and increases water resistance. IMPORTANT: Read all directions thoroughly. Wear gloves and eye protection.
- Above grade, vertical surfaces
- For low density decorative concrete and masonry
- Stops water penetration
- Low VOC's
- Tintable
- OTC compliant
| Best
for |
low density,
decorative concrete and masonry |
| Limitations |
above grade use only
- vertical surfaces
read label before use |
| Coverage |
Approx. 50 - 300
sq.ft. per gallon |
| Solids
Content |
25% |
| Paintable
/ Tintable |
yes |
| VOC |
<100g per liter |
| Color |
milky white, dries
clear |
| Size |
5 gallon |
| Application |
Spray, Roll, Brush |
Data / Spec and MSDS Sheets
Click here for Full Data Sheet (pdf)
Click here for MSDS(pdf)
| Product Number |
Unit size |
UPC Code |
Carton
Qty |
Carton
Code |
Carton
Size |
Carton
Size |
Carton
Weight (lbs) |
Pallet Qty |
| 701005 |
5-gal |
0
15944 701005 3 |
1 |
n/a |
12x12x15 |
1.25 cubed |
44 |
36 units |
|
